EDI进水不合格,模块半年报废本文按电子医药超纯水写:进水电导多少、产水多少、电阻率要多高,三个数定了前处理和模块。
先给进出水:RO产水电导定级数
报清RO产水电导、产水量、目标电阻率(15兆欧以上)。电除盐原理:Liquid to be purified is passed through depleting compartments containing mixed anion and cation exchange resin beads(电除盐淡室树脂专利结构)。Ions, under influence of a D.C. potential, pass from the depleting compartments into the concentrating compartments through ion permeable membranes。该迁移只说明该专利所述直流驱动机理电压电流按模块样本另行确认。与活性炭按碘值验吸附一样先进水指标再定工艺。

RO加EDI与三水走水:进水差加双级RO
RO电导高加双级或混床过渡。模块结构:The EDI module consists of a set of chambers filled with ion exchange resins and separated by ion-exchange membranes(EDI模块树脂膜腔室)。连续再生:regenerated continuously so that they do not exhaust in the same way as ion exchange beds that are operated in batch mode。该连续性只说明该厂商所述运行特点树脂寿命按水质另行确认。淡水产品浓水排放极水独立。与泵选型RFQ工况收集一样正常极限分开写。
模块仪表:数量排列电导电阻率在线表
模块按流量并联扩容留备用在线电导电阻率TOC报警。实例:5方每小时18兆欧,清单:进出水指标、产水量、前处理、模块数、回收率、仪表报警。六项一次写全。三个常错:进水超标硬上、无极水烧膜、浓水直排浪费。改法:进水电导卡线极水独立管浓水回用前端。