The application of stamping parts is very wide, involving all aspects of life. Stamping processing plant in the stamping parts processing, often found the burr problem of stamping parts. So, how to remove the burr of stamping parts? Next, metal stamping part manufacturer to introduce you to the stamping parts of the burr to remove.
A: remove the burr of the stamping part with the tool
1. Hole: chamfer or drill with large diameter should be used
2. Edge: apply the file knife, whetstone and sand paper
3. Welding through: vibration in addition to welding through special tools can also remove the brittle burr
4. Diameter: lathe guides Angle in the production process
5. There is also polishing, grinding, sandblasting treatment, which needs to see the product workpiece and commodity regulations.
Two: the process of removing burrs
1. Deburring with photoelectric catalysis. If the machine equipment from the cost is not high, high efficiency.
2. Vibration grinding to burr (transmission gear burr), high efficiency, quality can be.
3. The Heat treatment process can also deburr according to shot blasting, but also remove surface stress.
4. The actual effect of burring with heat gun and nozzle of various shapes is better and the efficiency is high.
